Six Ways To Wash Walls For Dry Goods Without Main Lights

发布日期:2023-11-21 15:10:15   浏览量 :49
发布日期:2023-11-21 15:10:15  
49

Besides Using Spotlights, What Other Ways Can We Wash Walls?

Whether To Suspend The Ceiling, Appropriate Wall Spacing For Each Lamp, And Spacing Between Lamps.



Copy The Homework And Give It Directly To The Decoration Master!


1. Embedded Spotlights


2. Surface Mounted Spotlights


3. Magnetic Track Spotlights


4. Linear Light Emitting Downward


5. Linear Light Emitting Horizontally


6. Linear Light Emitting Upwards


Summary:


13.jpg


① Embedded Spotlights

The Distance From The Center Hole Of The Lamp To The Wall Is 20-30cm

Lamp To Lamp Spacing 80-120cm


14.jpg


② Surface Mounted Spotlights

The Distance From The Center Hole Of The Lamp To The Wall Is 25-30cm

Lamp To Lamp Spacing 80-120cm


15.jpg


③ Magnetic Absorption Track Spotlights


Corner Reservation ≥ 50cm

Generally, The Distance Between The Installation Of Magnetic Absorption Track Lights And The Wall Is ≥ 50cm.

If Ceiling/Side Cabinet Lights Are Used, An Additional Width Of 50cm Should Be Added To Prevent The Lights From Being Cut Off.

Distance Between Lights: 100cm/2 Pieces, 150cm/3 Pieces, 200cm/4 Pieces (Can Be Moved Freely On The Track And The Distance Between Lights Can Be Adjusted)


16.jpg


④ Linear Light Emitting Downward

Looking Up Makes It Easy To Directly See The Lighting Fixtures


17.jpg


⑤ Horizontal Light Output Of Linear Lamp


Suitable For Spaces With Lower Floors, Visually Enhancing Floor Height And Achieving More Ideal Wall Cleaning Effects


18.jpg


⑥ Linear Light Emitting Upwards

Hidden Lighting Fixtures

In The Case Of Insufficient Distance Between The Perforated Walls And Narrow Hanging Walls, In Order To Avoid Overexposure And Truncation Of Light Spots Due To Being Too Close, Overlapping Light May Occur.

Suitable For ③ Magnetic Absorption Track Spotlights Or ⑥ Linear Lights Washing Up The Wall.

-

⚠ Be Careful:

Any Type Of Wall Washing Lamp Has Certain Requirements For The Wall. If The Rough Wall Surface Is Not Flat Enough, Having Secondary Light Spots And Stray Light In The Contour After Turning On The Light Will Actually Amplify The Shortcomings Of The Rough Wall Surface.

【 Test The Flatness Of The Wall 】:

You Can Turn On Your Phone Flashlight And Stick It Against The Wall To See The Flatness Of The Wall.

上一篇 : NIHAO1
云计算支持 反馈 枢纽云管理